AC MOTORS - ACCU-TORQ™ SERIES
ACCU-Torq™ Motor Series
Control Techniques provides a wide range of complimentary AC motors for an extensive range of applications. The ACCU-Torq™ motor series detailed below is a high performance high quality product manufactured by our sister Emerson division U.S. MOTORS®. ACCU-Torq™ Motor SeriesDesigned for use with inverter and vector drive applications requiring up to a 2000:1 constant torque speed range. This makes it perfect for use with Commander SL, SK or Unidrive SP drives. The ACCU-Torq motor may be used for almost any AC drive application from a simple conveyor to those applications requiring the very best speed and torque or position control. ApplicationsACCU-Torq™ is ideal for a wide range of applications, including:
Benefits
If you need to accurately position the motor, but don’t require the high speed and rapid acceleration dynamics of a servo motor, the Unidrive SP with an encoder equipped AC induction motor may be the optimum performance solution as well as very affordable. The flexibility and high performance of the Unidrive SP make it possible to control three phase induction motors on applications that previously demanded higher priced servo motors. Point to point indexing and material handling applications are ideal for utilizing this capability, especially when motors above 5 hp are required. The cost savings is significant due to the lower cost of materials used in the induction motor design. AC induction motors have rotors with more mass and larger diameters than servo motors of the same torque capacity, and therefore higher inertia. This is helpful for high load-to-motor inertia ratios, and in most cases can eliminate the need for inertia matching gear reduction. The higher inertia of these systems also results in greater low-speed stability. |
Home / Contact Us / Products / Service / Sales /Supported Product / Powertec Support / Serviced Products / Feedback
Microcon Technologies Inc.
1105 Crestlawn Drive, Unit # D8 & D9
Mississauga, Ontario L4W 1A7 Canada
Tel: (905) 602-4770
Fax: (905) 602-4779
e-mail: sales@microcontechnologies.com
Website: www.microcontechnologies.com