Powertec Replacement Boards

Speed Board Hi Intertia MODS	4001-141107-008
Negative IR Comp	4001-141107-010
5000 to 12000 RPM 4 Pole or 2500 to 6000 8 Pole	4001-141107-011
Flat Current Limit Profile	4001-141107-XXX
12 Step Current Control	4001-141108-001
2.5 KHz PWM and z1 EPROM, Hi Speed, No Advance	4001-141108-013
Hi Speed & Phase Advance Current Control Board	4001-141108-017
Servo with X 1 EPROM	4001-141108-101
Servo current control Board	4001-141108-102
Servo with X 4 EPROM	4001-141108-104
Servo W X 1 EPROM, Phase Advance for Speed Trim	4001-141108-105
Standard Board Without Advance	4001-141108-202
Servo torque Command Control Current Control Board	4001-141108-211
4000 Drive W EPROM for Equalizing Heatsink Temp	4001-141108-212
Accumulator Applications Regen where DIR is not always set by reference Pol	4001-141108-213
Torque command controller without stall use on 2 or 3 HP 1000 drives only	4001-141108-214
Old F2 Style Motors with phase advance	4001-141108-215
Torque command controller for CINCI MIL Electra W Sensitive stall Protection	4001-141108-216
Intrinsically safe Hall Senor MODS	4001-141108-217
250 Millisecond Ride Thru Capacitor Board	4001-141206-1XX
MODS for Torque Command Controller, Milacron plate Drives	4001-141208-006
MODS for Torque Command Controller	4001-141208-007
12 Step Current Control	4001-141208-201
12 Step Current Control, with Extended Advance Angles	4001-141208-202
Flywheel Drive, 460V for use on 40HP & 75HP	4001-144009-160
Extended Coast Thru Time 250 Msec	4001-144009-1XX
Plate Drive W Lowered UV Setpoint & Contactor Pullin Point	4001-144009-203
Speed Board 50 to 70 Second Accel and Decel	4001-147101-012
Speed Board Low Base Speed Motors	4001-147101-020
Servo Speed Elevator Duty	4001-147101-106
Servo Speed Hi Inertia	4001-147101-109
Speed Board Hi Intertia Mods	4001-147101-200
Torque Command Controller Negative IR Comp	4001-147102-005
Torque Command Controller	4001-147105-001
Digimax BCD Input Module	4001-153220-002
Digimax Keypad Interface	4001-153221-001
BCD Frequency Controller	4001-153400-003
BCD Frequency Controller Display	4001-153410-001
Cascade Ratio PLL	4001-153430-002
500 Bottom	4001-154001-001
500 Top 400 Millisecond Ridethru	4001-154003-001
500 Top Fine Tune Short Accel and Decel	4001-154003-002
500 Top	4001-154003-004
500 Servo Top	4001-154003-004-104