Pump Drive F600

 

Simple, reliable flow control 

Applications involving the flow of water demand extreme reliability and low energy consumption. Control Techniques’ F600 drive, part of the newly introduced Specialist series of industry-specific drive technologies, builds on our company’s five decades of drives expertise, delivering precise, dependable flow control.

Everything you need is baked into the drive itself. The F600 packs all of the features you’ll need, presented using terminology you’ll understand. This isn’t a generic drive with pump features tacked on; it’s a dedicated, specialist pump drive, designed from the ground up to deliver the reliability and efficiency you need. 

 

The perfect mix of application-specific features developed into a single solution  


 
Speaks your language
The F600 drive is tuned to suit your every need, optimized for minimal setup time yet sacrificing none of the flexibility. Whatever the challenge, our dedicated approach to clear parameter naming and structuring ensures we not only have the answers, but in a format you’ll understand.
 

 
Energy savings, unlocking the potential

On average, 85% of a pump’s life-cycle cost is attributed to its energy consumption, therefore, optimizing the energy usage can mean a significant reduction in the total cost of ownership. The F600 drive thrives on delivering more efficient ways of operating your variable torque application. You’ll see the benefits in reduced running costs and lower energy requirements.


 
Total control
The F600 can also control the most efficient motors available, meeting IE5 efficiency levels, such as the Nidec Leroy Somer Dyneo+ hybrid permanent-magnet motor. With all of this combined, the F600 is your best choice to save you money every day.
 

 
Engineered for your application
The F600 Pump Drive offers a host of dedicated features including dry-run prevention, pipe fill, pump cleaning, over-cycling protection and level switch control. A range of different control modes covering single pumps and also different parallel pump configurations make Control Techniques’ F600 a truly versatile solution.
 

 
Free 5 year warranty
To share our confidence in the reliability of Control Techniques, drives in the F600 range are eligible for Control Techniques’ extended warranty, at no extra cost.
It is a testament to our exceptional track record for reliability, giving you total peace of mind that your investment is protected and your site will continue to run uninterrupted.
Warranty terms and conditions apply.
 
 
  • Variants

    Maximum versatility, variants for every application

    Unidrive DFS is available with a control stage to suit any application:

    • Industrial automation systems based upon induction or servo motors, where control dynamics are key.

    • DFS supports the latest high-efficiency motors to maximize return on investment and minimize impact on the environment.

     

    Select from:
    Unidrive M600, M700, M701, M702 or Unidrive M702 control:

    AC Drive Unidrive M600
     
    M600

    High Performance Sensorless PM and IM Control.

    • Modbus RTU over RS485 communications
    • 1 x STO certified to SIL3/PLe
    • Analog and digital I/O
    • Optional IM closed loop vector control

         

    unidrive m700
    M700

    High Performance PM and IM Control

    • Multi-protocol Ethernet communications
    • 1 x STO certified to SIL3/PLe
    • Analog and digital I/O
    • Advanced Motion Controller and optional Machine Controller
    unidrive m700
    M701

    High Performance PM and IM Control.

    • Modbus RTU over RS485 communications
    • 1 x STO certified to SIL3/PLe
    • Analog and digital I/O
    • Advanced Motion Controller and optional Machine Controller
    unidrive m700
    M702

    High Performance PM and IM Control.

    • Multi-protocol Ethernet communications
    • 2 x STO certified to SIL3/ PLe
    • Digital I/O onboard, analog I/O option available
    • Advanced Motion Controller and optional Machine Controller
  • Applications

    Whatever your application, DFS is the perfect solution across industry:

     
    High Power Freestanding Drives for Fans & Pumps
     
    Fans & pumps
    • Fan & pump macros, plus onboard logic functions
    • Water hammer control, and catch a spinning motor
    • On-board Fire Mode
    • Improved energy efficiency during low demand
    High Power Freestanding Drives for Compressors
     
    Compressors
    • On board PLC & PID functionalities for advanced control without the cost and footprint of an external controller
    • Energy efficiency and optimal control for increased Coefficient of Performance (CoP)
    High Power Freestanding Drives for General Automation
     
    General Automation
    • Maximum control for conveyors with S-ramp acceleration/deceleration profiling and RFC-A automated load control
    • Efficient control of mixer applications and up to 200% overload
    • Closed-loop control for cranes and hoists for precision accuracy
    • Reliability and control for crushers
    • Precision and repeatability for extruder applications thru high-dynamic speed response, while delivering best energy efficiency with permanent magnet motor control
    • High energy efficiency and torque control for tunneling and drilling applications and up to 200% overload
  • Options

    Enclosure rating NEMA1 (Totally Enclosed, Filtered)
    NEMA12 (IP54)
    Environmental 35°C (95°F) Standard or 45°C (113°F) Ambient Temperature Rating
    (Drive rating of 40°C (104°F) and 50°C (122°F) respectively)
    Anti-condensation Heaters
    Supply Molded Case Circuit Breaker (MCCB) 35 kA*
    Molded Case Circuit Breaker 65 kA*
    Molded Case Circuit Breaker 100 kA*
    MCCB Shunt Trip 110 V
    MCCB Under Voltage Trip 110 V
    MCCB Auxiliary Contacts
    Harmonic Filters
    Input Contactor
    Incomer Bay (DFS1 Only - Isolated MCCB & Fuses, supports top or bottom cable supply)
    Door Controls Remote Mounted Keypad (Standard)
    Start & Stop Pushbuttons
    Running & Power-On Lamps
    Fault/Reset Pushbutton & Lamp
    Auto/Manual Selector Switch
    Speed Potentiometer
    Ethernet/110Vac Outlet
    Emergency Stop (Standard or w/ relay)
    Power / Energy Meter
    180 degree hinged doors
    Locks: Barrel Type (Standard), Key, or Padlockable
    HMI
    Motor dV/dt Protection
    Brake Control
    Motor Blower Starter
    Enclosure Configuration Options MOV protection for use on un-earthed supplies
    Remove internal EMC filter for use on un-earthed supplies
    24 Vdc External Supply (maintains control of drive with isolator open)
    Additional terminal rail for customer control connections
    110Vac Control Interface (24 Vdc Standard)
    Interior Lighting
    4” Plinth-base (Standard), 8” Plinth-base (Optional)
    Additional Enclosure Bay with backplate (15.75”)
    Freight & Packaging Expedited Shipping
    Additional Crating Options
  • Software & Support

    Intuitive commissioning software
    Connect commisioning software  Connect - Commissioning tool

    Based on Control Techniques’ 25 years' experience, Connect is our latest drive configuration tool for commissioning, optimizing and monitoring drive/system performance.

     
    Advanced machine control
    Machine-Control-Studio Machine Control Studio - Programming tool

    Control Techniques' Machine Control Studio provides a flexible and intuitive environment for programming Commander C’s new automation and motion control features.

     
    Diagnostics Tool
    diagnostic tool mobile app  Diagnostic Tool

    Diagnostic Tool is a fast and simple tool, which allows users of Control Techniques' drives to quickly solve any error codes that the drive may show.

     
    Drive Setup
    Drive Setup section for step by step variable speed drive configuration  Drive Setup

    Free access web pages provide ‘how-to’ videos, step by step guides and comprehensive technical manuals for your drive installation.

     

 


Home / Contact Us / Products / Service / Sales /Supported Product / Powertec Support / Serviced Products / Feedback


 

Microcon Technologies Inc.

1105 Crestlawn Drive, Unit # D8 & D9

Mississauga, Ontario L4W 1A7 Canada

Tel: (905) 602-4770

Fax: (905) 602-4779

e-mail: sales@microcontechnologies.com

Website: www.microcontechnologies.com