SM-Options - SM-I/O 120V

SM-I/O 120V Termination

Option Module	Colour	Name	9 Way Terminal
	Olive	SM-IO 120V	Orange
9 way Terminal			Description
T1			Digital input 1
T2			Digital input 2
T3			Neutral for digital inputs 1 & 2
T4			Digital input 3
T5			Digital input 4
T6			Neutral for digital inputs 3 & 4
T7			Digital input 5
T8			Digital input 6
T9			Neutral for digital inputs 5 & 6
T10			Relay 1
T11			Relay common
T12			Relay 2

Features

All connections from the Solutions Module to the drive are made via the drive connector.
Connections from external equipment to the SM-I/O 120V are made via a 12-way pluggable screw connector.
The SM-I/O 120V has the following features:

Six digital inputs (120V AC)
Two relay outputs (120V AC 2A resistive)

The input terminals are organized in three groups of three. Each group serves two inputs with the first two terminals as inputs and the third terminal as the common neutral for the group. Groups are isolated from each other, allowing inputs derived from up to three different voltage sources or branch circuits without regard to phase. The two inputs within a group must be powered from one single-phase circuit. Each common neutral must be ground referenced at its source.

All the I/O in the SM-I/O 120V are user programmable for function and signal processing.
All parameters associated to the SM-I/O 120V can be found in either menu 15, 16 or 17, with each menu referring to a separate slot. See Figure 4-1 on page 10 of manual.
A total of three SM-I/O 120V can be fitted at any one time.