125 hp – 4,200 hp (0.75 kW –
2.8 MW)
208 - 240 V | 380 - 480 V | 575 V | 690 V
Unidrive M’s modular AC drive offering
provides a flexible method of building compact, reliable
high-power solutions. Paralleled together,
Unidrive M can control induction and permanent
magnet motors in systems up to 2.8 MW (4,200 hp).
Unidrive M differentiates itself on
performance with extremely fast current control algorithms
and high switching frequencies. Active Front End (AFE)
solutions deliver unparalleled high performance regenerative
control and ultra-low harmonic power quality.
The Unidrive M power modules can be
paralleled into a wide range of flexible solutions to solve
all system needs including Active Front End and multi-pulse
rectifier configurations. They can be controlled by M600,
M700, M701 and M702 controllers.
-
Features
Minimize downtime for critical
operations
-
Unidrive M high power modules
have exceptional build quality based on over 40
years' of AC drive knowledge,
expertise and development
-
The modular design provides easy
and rapid change out in the event of an
emergency situation
Reliability assured
-
Every Unidrive M high
power module has been thoroughly tested
in environmental chambers that cycle a wide
range of load and thermal conditions
-
PCBs have conformal coating to
further increase resilience to harsh
environmental conditions
-
Trip avoidance features take
intelligent action instead of interrupting
critical processes
-
Protection alarms safeguard the
wider system
-
Intelligent variable
speed fans ensure operating temperature
stays within limits
-
Wide supply voltage tolerance
keeps drive operation smooth in areas where
supplies are variable
Create flexible systems easily
-
The modular approach to building
high power systems provides machine builders
with flexibility while keeping complexity low
-
Modules with integrated
rectifiers and/or line chokes can be easily
paralleled
-
Separate inverter and rectifier
modules (D, RECT..A and RECT..T) can be
paralleled into common DC bus and regenerative
configurations
Flexible and easy system design
-
Unidrive M high power modules
are designed to fit in standard 600 mm deep x
400 mm wide (23.6 x 15.7 in) enclosures
-
6,12,18 and 24 pulse input and
Active Front End configurations are easy to
achieve
-
Integrated cooling fan
power supply means no additional power
supplies are required
-
Output current ratings have been
increased to use fewer modules per system
-
A common control interface
ensures a consistent programming method and
feature set across the whole Unidrive M range
Make compact, easily maintainable
systems
Reduce spares inventory
Unidrive M’s modular approach gives
customers the opportunity to standardize their
solutions in order to keep spares holding to a
minimum as different systems can be serviced using
one common spare. Large volumes of standard product
modules are stocked at local distribution hubs in
convenient locations around the world meaning that
rapid delivery is always available to all customers.
Upgrade Unidrive SP modular systems
painlessly
Migration of Unidrive SP modular
systems to Unidrive M is fast and easy:
-
Parameter porting tools such as
Connect and Smartcard are available
-
SyptPro can recompile
SM-Applications programs for SI-Applications,
and can connect to existing CTNet networks
-
Identical width and depth
dimensions, along with retrofit kits, mean that
Unidrive M modules can easily fit into SP
modular locations using existing fittings
Environmental safety and
electrical conformance
Create high performance solutions
-
Switching frequencies of up to
16 kHz in systems up to 250 hp (160 kW) and 8
kHz in systems up to 400 hp (250 kW) allow
Unidrive M to provide precision torque
control
-
Highly accurate thermal model
ensures:
-
High overload capability –
150% Heavy Duty
-
Impressive low derating
requirement in applications that demand high
torque at low speeds. Power device
temperature is intelligently managed meaning
smaller lower priced systems can be
specified and product life is extended
-
Dynamic Active Front End
configurations provide:
-
Precision torque linearity
across quadrants
-
Corrective power factor
operation (lagging, unity or leading) for
high quality power
-
Harmonic mitigation
-
Specifications
Key data
Heavy Duty rating:
125 hp – 4,200 hp (90 kW – 2.8 MW)
Supply phases: 3
phase
Control connections:
Drive control module dependent
-
M700 and M701 control modules: 3
x Analog inputs, 3 x Digital inputs, 2 x Analog
outputs, 3x Digital I/O, 1 STO, 1 x Relay
-
M702 control module: 3 x Digital
inputs, 3 x Digital output, 2 x STO, 1 x Relay
-
M600 control module: 3 x Analog
inputs, 4 x Digital inputs, 2 x Analog outputs,
3 x Digital I/O, 1 x Digital output, 1 x Relay
Feedback: Drive
control module dependent
-
M700, M701 & M702 control
modules: 2 x Encoder inputs, 1 x simulated
encoder output
-
M600 control module: SI-UNI-ENCODER
or SI-ENCODER module required for closed loop
induction motor control
Intelligence: Onboard PLC and
Advanced Motion Controller Drive
control module dependent (AMC only applicable to
M700, M701 & M702 control modules)
Onboard communications:
Drive control module dependent
-
M700 and M702 control modules:
Ethernet (EtherNet/IP, Modbus TCP, RTMoE)
-
M600 and M701 control modules:
RS485 (Modbus RTU)
Machine safety: Drive control
module dependent, SIL3/PLe compliant
-
M600, M700 & M701 control
modules: Single Safe Torque Off (STO) terminal
-
M702 control modules:
Dual Safe Torque Off (STO) terminals
Keypad: No keypad (standard)
-
KI-KEYPAD-LCD: Plain-text,
multi-language LCD keypad for in-depth parameter
and data descriptions for enhanced user
experience
-
KI-KEYPAD-RTC: All the features
of KI-Keypad-LCD, plus a battery operated
real-time clock which allows accurate time
stamping of events, aiding diagnostics
-
REMOTE-KEYPAD: Remote mountable,
plain-text, multi-language LCD
keypad allows flexible mounting outside of a
panel and meets IP66 (NEMA 4)
-
REMOTE-KEYPAD-RTC: The keypad is
remote mountable, enabling flexible mounting on
the outside of a panel (meets IP54/ NEMA
12). Three line plain text,
multi-language LCD keypad for rapid set-up and
helpful diagnostics. Battery operated real-time
clock allows accurate time stamping of events,
aiding diagnostics.
System Integration options slots: 3
Parameter cloning:
PC tools, smartcard, and SD card
VOLTAGE RATINGS |
100 V (100 V - 120 V ±
10%) |
|
200 V (200 V - 240 V ±
10%) |
✓ |
400 V (380 V - 480 V ±
10%) |
✓ |
575 V (500 V - 575 V ±
10%) |
✓ |
690 V (500 V - 690 V ±
10%) |
✓ |
CONTROL MODE |
Open-loop vector or V/Hz
induction motor control |
✓ |
Open-loop Rotor Flux
Control for induction motors (RFC-A) |
✓ |
Open-loop permanent
magnet motor control (RFC-S) |
✓ |
Closed-loop Rotor Flux
Control for induction motors (RFC-A) |
✓ |
Closed-loop permanent
magnet motor control (RFC-S) |
✓ |
Active Front End (AFE)
power quality convertor |
✓ |
MODULAR DRIVES:
FRAME SIZE |
DIMENSIONS (H X W X
D) |
|
mm |
in |
INVERTER &
RECTIFIER |
9A |
1108 x 310 x 290 |
43.62 x 12.21 x 11.4 |
9E | 9T |
1069 x 310 x 290 |
42.1 x 12.2 x 11.4 |
10E | 10T |
1069 x 310 x 290 |
42.1 x 12.2 x 11.4 |
11E | 11T |
1242x 310 x 312 |
48.9 x 12.2 x 12.3 |
INVERTER
|
9D |
773 x 310 x 290 |
30.4 x 12.2 x 11.4 |
10D |
773 x 310 x 290 |
30.4 x 12.2 x 11.4 |
11D |
863 x 310 x 312 |
34 x 12.2 x 12.3 |
RECTIFIER |
10A |
6 pulse
355 x 310 x 290 |
6 pulse
15.8 x 12.2 x 11.4 |
11A | 11T |
6 pulse
415 x 310 x 290
12 pulse
415 x 310 x 290 |
6 pulse
16.3 x 12.2 x 11.4
12 pulse
16.3 x 12.2 x 11.4
|
Dimensions include mounting
brackets.
-
Options
Keypads
|
KI-Keypad
Plain text,
multi-language LCD keypad with up to 4
lines of text for in depth parameter and
data descriptions, for enhanced user
experience. |
|
KI-Keypad
RTC
All the features of the
KI-Keypad, plus a battery operated
real-time clock. This allows accurate
time stamping of events, aiding
diagnostics. |
|
Remote
keypad
All the features of the
CI-Keypad LCD, but remote mountable.
This allows flexible mounting on the
outside of a panel and meets IP66 (NEMA
4). |
|
Remote
Keypad-RTC
The keypad is remote
mountable, allowing flexible mounting on
the outside of a panel (meets IP54/ NEMA
12). Three line multi-language plus
custom text LCD keypad for rapid setup
and helpful diagnostics. Battery
operated real-time clock allows accurate
time stamping of events, aiding
diagnostics. |
System Integration Modules -
Feedback
|
SI-Encoder
Quadrature encoder input
interface module. |
|
SI-Uni-Encoder
Universal encoder input
and output interface supporting
Quadrature, SinCos, EnDat and SSI
encoders |
System Integration Modules -
Communications
|
SI-PROFIBUS
PROFIBUS interface
module |
|
SI-DeviceNet
DeviceNet interface
module |
|
SI-CANopen
CANopen interface module
supporting various profiles, including
several drive profiles |
|
SI-Ethernet
Ethernet module that
supports EtherNet/IP and Modbus TCP/IP |
|
SI-PROFINET
PROFINET RT interface
module |
|
SI-EtherCAT
EtherCAT interface
module |
System Integration Modules -
Applications
|
SI-APPS-PLUS
Second processor module,
which allows SyPTPro application
programs to be re-compiled for Unidrive
M700. |
|
MCi200
Second processor,
providing advanced machine control using
Machine Control Studio. |
|
MCi210
Adds to the MCi200 with
a dual port Ethernet interface directly
on the processor and additional I/O |
System Integration Modules -
Additional I/O
|
SI-I/O
Extended I/O interface
module to increase the number of I/O
points on a drive. Provides additional:
4 x Digital I/O, 3 x Analog inputs
(default)/Digital inputs, 1 x Analog
output (default)/Digital input, 2 x
Relays. |
System Integration Modules - Safety
|
SI-Safety
An intelligent,
programmable module to meet the IEC
61800-5-2/ISO 13849-1 functional safety
standard up to SIL3/PLe. |
Drive Interface Units - Backup
|
Smartcard
Smartcard memory device
to backup and copy parameter sets and
basic PLC programs. |
|
SD Card
Adaptor
Allows an SD card to be
inserted into the Smartcard slot, for
parameter backup cloning and application
programs (SD card not included). |
Drive interface units -
Communications
|
KI-485
Adaptor
This allows the drive to
communicate via RS485. This is commonly
used to connect to a PC via Modbus RTU
RS485 connection for use with Unidrive
M's PC tools. |
|
CT-USB
Comms cable
The USB communications
cable allows the drive to connect to a
PC for use with Unidrive M's PC tools
via Modbus RTU. |
-
Software
Commissioning and monitoring
software
|
Connect
- Commissioning tool
Based on Control
Techniques’ 25 years experience,
Unidrive M Connect is our latest drive
configuration tool for commissioning,
optimizing and monitoring drive/system
performance |
Automation and motion programming
software
|
Machine
Control Studio - Programming Tool
Control Techniques
Machine Control Studio provides a
flexible and intuitive environment for
programming Unidrive M’s new automation
and motion control features |
|